Switch it on
Slide the POWER switch up. The POWER light comes on and the other lights start to circle.
Circling lights: no need to wait
The circling just means the metal tip is warming to body temperature. It happens in the background, so carry on setting up. When all six lights flash three times, the tip is warm. You can also just touch it. The tip warms again after you install a new program.
MODE: the intensity
Press MODE to choose L (low), M (medium) or H (high).
TIME: the session
Nothing runs until you set a time. Press TIME for 5, 10 or 15 minutes. The session starts, and the time light blinks while it counts down. With five minutes left, the 5 light takes over.
The device makes no sound when the time is up, so keep an eye on the lights or set a timer on your phone.
The lights at a glance
| You see | It means |
|---|---|
| Lights circling one at a time | The tip is warming. Carry on. |
| All six flash three times | The tip is warm. |
| Left column: 15, 10, 5 | The session time. |
| Right column: H, M, L | The intensity. |
| A time light blinking | A session is running. |
Device on, but nothing seems to happen? Check that you’ve pressed TIME. With no time set, there’s no output.
UltraDAO devices and frequency programs are wellness and research instruments. The PULSE system is not a medical device, is not FDA cleared, and nothing here is medical advice.