PULSE — a research & development kit that modifies the US PRO 2000 to talk to the entire UltraDAO frequency library. Tap your phone. Aim. Built around an integrated NFC module — every signed frequency you own, on demand. Sold for research and development use only.

PULSE is the only hardware that decodes the UltraDAO library. Each IP-NFT in the marketplace is signed for this transducer; no other device on earth will play it. Owning one without the other is half the loop.
Calibrated, signed, NFC-enabled. Holds one frequency at a time, swaps in seconds with a phone tap.
Twelve IP-NFTs and counting — each a programmable wave authored by a clinician, signed on-chain, royalty-bearing.
A one-time hardware purchase — the PULSE Module ($99) or the US PRO 2000 with PULSE already installed ($299). Ships within the United States; sales tax is calculated at checkout.
The G2 100 Hz frequency is included free with every account — your device runs a real waveform out of the box. Four more frequencies are available today, including the nested packages, with more to come. Buy titles individually in the marketplace — pricing is set per frequency and can change — and each is independently licensed, with royalties flowing back to the authoring clinicians and the DAO.
PULSE isn't an imaging probe — it's a neurostimulation controller. The board slots into the ultrasound, takes a frequency you pick on your phone over NFC, flashes it into the instrument, and the ultrasound runs that wave into the target. Scroll to take the board apart, stage by stage.
— PULSE · REV.A1 · REAL BOARD GEOMETRY · SCROLL TO EXPLODE —
The PULSE board sits inside the ultrasound, waiting. Pick a frequency on your phone.
Hold the phone to the NFC antenna. The frequency you chose crosses over — a signed UltraDAO payload, clocked in by Y1 at 27.12 MHz.
The signed frequency is written to flash and checked against keys provisioned by UltraDAO. Good signature → it stays. Bad → it never lands.
The RP2040 takes over and flashes the ultrasound with your wave — the instrument now carries that exact frequency. No imaging, no presets.
Pure neurostimulation, not imaging. The ultrasound runs the loaded frequency into the target — focal, non-invasive, down to the cellular level.
Everything you need for your research log.
| Capability | Standard portable units | Therapy-only ultrasound | PULSE |
|---|---|---|---|
| Whole-library frequency support (1Hz–40kHz) | No | Limited | Yes |
| NFC frequency loading | No | No | Yes |
| UltraDAO-signed manifest verification | No | No | Yes |
| Royalty pass-through to authors | No | No | Yes |
| Full-power output (3.0 W/cm²) | Limited | Yes | Yes |
| PULSE hardware | — | — | From $99 |
Two products, shipped within the United States. The PULSE Module installs into a US PRO 2000; the US PRO 2000 ships fully assembled with the module already installed. Sign in to your account to check out — sales tax is calculated at checkout.
Yes. The G2 100 Hz frequency comes free with every UltraDAO account — it's in your library from the moment you sign up, so your ultrasound runs a real waveform the day it arrives with nothing else to buy. Additional frequencies are sold individually in the marketplace — pricing is set per frequency and can change — and some are gifted, or granted through taking part in research.
Sign in to the UltraNFC iPhone app with your UltraDAO account. Your library — the free 100 Hz plus anything you've bought or been gifted — appears in the app, and one NFC tap flashes a frequency onto the device. Purchases happen on the website only; the app is where your library lives and flashes from.
No third-party hardware can decode UD-signed frequencies. The IP-NFT remains in your wallet, but it produces no waveform without PULSE.
No. PULSE is a research & development kit — a modification of the US PRO 2000 — sold for research and development use only. It is not a medical device, is not FDA cleared, and is not intended for clinical diagnosis, treatment, or any medical use.
Built in Washington state and shipped within the United States only. Sales tax is calculated at checkout based on your shipping address.
Yes — full refund. If it hasn't shipped yet, cancel it yourself from the order page in your account and the refund is issued immediately. Once a shipping label is printed it's already on its way, so it becomes a return instead: send the PULSE board back and we refund you in full. If it comes back working, you're refunded; if it comes back dead, you're still refunded — we want defective units returned so we can test them and make the next revision better. Email [email protected] with your order number and we'll turn it around fast.